Description
| Usage/Application |
Interior wall surfaces such as ceilings, plasters, bricks, asbestos etc
|
| Packaging Size |
1 ltrs,4 ltrs,10 ltrs and 20 ltrs
|
| Brand |
Nerolac
|
| Finish |
Matt
|
| Surface of Application |
Walls
|
| Packaging Type |
Bucket
|
| Coverage |
17.65-20.44 sq.mt/ltr/coat when applied to smooth and non absorbent surface
|
| Drying Time |
30 minutes (Surface dry)
|
| No. Of Shaded Possible |
More than 1400
|
| Thinning |
40-50% by volume using water.
|
| Stability Of Thinned Paint |
Use within 24 hrs
|
| Recoating |
Min. 4 -6 hrs(@27 +/-2 Degree Celsius and RH 60 +/-5%)
|
| Flash Point |
NA
|
| Dry Film Thickness Per Coat |
15-20 (Brush),25-30 (Roller) in microns
|
| VOC |
Less than 50 gms/ltr
|
Nerolac Beauty Smooth FinishInterior Emulsion Wall Paint is a specially developed, economical interior emulsion for a distinctly rich and finish. Its optimum performance, with respect to decoration and protection, is through an ideal combination of pigments and extenders, dispersed in a copolymer emulsion.
Performance Features & Benefits:
Ease of application.
Good Washability (Compared to distemper)
Non-Flammable
Moderate Washable
Surface Preparation:
Ensure the surface is clean, dry and free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down, using a suitable abrasive paper and thereafter wipe off.
Treat the fungus affected area by using Nerolac Fungicidal solution. Allow it to react for 6-8 hrs.
Apply a coat of suitable primer followed by putty to level the dents and make the surface uniform.
Apply again a coat of Suitable Primer again.
Then apply two coats of Nerolac Beauty smooth Finish Interior Emulsion.
Precautions:
Refer MSDS for Nerolac Beauty smooth Finish Interior Emulsion for safety measures and precautions.
Store in well ambient conditions, ventilated locations and away from sources of ignition and Fire.
Keep away from children.
In case of eye/skin contact wash with plenty of water
Inhalation/Injection will cause danger. In either move to fresh air and consult medical practitioners in both the cases.
Do not apply when the ambient temperature might drop to levels below 10 degrees C within 4 hrs of application.
New plaster should be allowed to cure for minimum 12 weeks.
Avoid extra thinning for better results.
Can be tinted with Nerolac Hi-Power Universal Stainer before thinning. Do not add more than 5% of Nerolac Hi-Power Stainer. Stir the tinted paint well, after tinting and before application.
The container must be tightly closed when not in use. Stir well and strain before use.
Use safety equipment like rubber or polythene gloves, safety goggles/glasses, and Face mask.
Post Application Instructions:
Surfaces painted with Nerolac Beauty Smooth Finish Interior Emulsion are washable by sponging with mild soap and water after a minimum of 2 weeks drying time to remove ordinary stains and everyday dirt.
Reviews
There are no reviews yet.