Description

Description:
Integral Waterproofing Admixture with Advanced Technology Conplast WL Xtra
Punch Ka Dam
5 Benefits:
-Advanced technology
Corrosion resistance
High strength – Cohesive mix
Durability
To minimium permeability and increase the waterproofingproperties of concrete and cement sand mortars for criticalapplications like roof slabs and screeds, basements, externalplastering, bathroom floors, water tanks, sumps, drains etc
Advantages„
Liquid admixture: Instant and complete dispersionthroughout the mix. Uniform waterproofing throughoutconcrete matrix.
„High efficiency Dramatic reduction in permeability ofconcrete/ mortar„Improved workability:
Improves compaction of concreteand mortar, even where harsh sands or aggregates areused.„
Improved concrete quality
Minimises porosity and honeycombing. Produces dense homogenous concrete.
Description Conplast WL is a dark brown liquid based onlignosulphonates which mixes readily with water andtherefore disperses evenly.Conplast WL waterproofs by improving the quality of theconcrete or mortar. It reduces the water demand for requiredworkability and minimises segregation and bleeding. Thusit is more efficient compared to traditional powder water proofers as its use results in two fold improvement ofconcrete or mortar
Mortar: Conplast WL is ideal for use with all sand/cementmortars where it is required to reduce permeability to animum.
Concrete: Conplast WL is recommended for all general massconcrete work where, due to harsh aggregates, difficulty ofcompaction or mix control, the risk of porosity and permeability must be minimised. Eg. Basements, bund walls, tanks,balcony, floor and roof slabs.
N.B.: The minimum dosage is 125ml and the maximum is200ml per 50kgs of cement. If maximum dosage is used aminimum of 15% water should be reduced to ensure no loss in strength. Site trials shall be carried out to arrive at theoptimum dosage.The required quantity of Conplast WL is measured and stirin to the first or second bucket of water.Conplast WL water mixture shall be added to the concrete ormortar and mixed thoroughly.Mixing shall be continued and further water shall be added until the required workability is obtained.

Fosroc Fosguard is a high-performance integral waterproofing admixture designed to be mixed directly into concrete or mortar during batching. It enhances the water-repellent properties of concrete by reducing permeability and improving durability. Fosguard prevents water ingress, minimizes shrinkage cracks, and improves the overall life of the structure. Ideal for both above and below ground applications, it is especially effective in water-retaining or water-exposed structures.

Key Features:

Integral waterproofing solution – mixed directly into concrete/mortar

Reduces capillary action and water absorption

Improves workability and surface finish

Minimizes cracks due to shrinkage

Increases concrete durability and longevity

Compatible with all types of cement

Chloride-free – safe for reinforced concrete

Applications:

Foundations, basements, and retaining walls

Water tanks, sumps, and reservoirs

Roof slabs, terraces, and balconies

RCC columns, beams, and plaster

Tunnels and substructures

Dosage:

Typically 100 ml to 200 ml per 50 kg of cement

Adjust dosage based on site requirements and water-cement ratio

Packaging:

Supplied in 20 kg HDPE containers

Standards:

Conforms to IS: 2645 standards for integral waterproofing admixtures