Description

MRF MetalCoat is a multipurpose 100% aliphatic polyurethane finish offers protection and durability to Metals and can also be used to coat Wood & Plastics.

Economical Two pack polyurethane Clear Wood Finish For Interiors
Pack Sizes

• 1 Ltr, 4 Ltrs and 20 Ltrs
• Surface PreparationThe raw wooden surface to be coated should be clean, dry, free from moisture ,dampness and other contamination

  For hard wood, sand the surface using Sandpaper #80, followed by Sandpapers #120, #150, #180 and #220

  For Veneer ply surfaces,start with Sandpaper #220

  Always sand in the direction of the wood grain

  Apply Using

  • Conventional Spray, Nozzle orifice: 0.059 inches, Pressure: 35 – 45 psi
  • Thinning Details
    • Thinner Recommended – Thinner for finish

    WoodCoat Ultra Int.Sealer White	20 – 25%
    WoodCoat Ultra Int.High Gloss White	30 – 35%
    WoodCoat Ultra Int. Matt White	15 – 20%
    WoodCoat Ultra Int.High Gloss Clear	25 – 30%
    WoodCoat Ultra Int. Matt Clear	20 – 25%

  • Application ProcedureMix the base thoroughly prior to mixing with the hardener

    Avoid applying in direct sunlight or when the humidity is very high

    WoodCoat Ultra WhiteApply 2 to 3 coats of WoodCoat Ultra Interior Sealer white with an interval of 2 hrs between the subsequent coats. Sanding should be done prior to the application of each coat

    Sandpaper #220 can be used for the first coat and Sandpaper #400 can be used for the second and third coats, number of coats of sealer required varies from 2 to 3 depending on the absorption of wood

    Apply 2 coats of either WoodCoat Ultra Interior High Gloss White / Matt White depending on the requirement, with an interval of 5 hrs between subsequent coats. Sanding of the first coat shall be done using Sandpaper #600 or #1000

    WoodCoat Ultra Other ShadesApply one coats of WoodCoat Ultra Interior Sealer white followed be 2 to 3 coats of WoodCoat Ultra Interior coloured sealer (tinted) with an interval of 2 hrs between the subsequent coats

    Sandpaper #220 shall be used for the first coat and Sandpaper #400 shall be used for subsequent coats

    Apply 2 coats of either WoodCoat Ultra Interior High Gloss Clear / Matt Clear depending on the requirement, with an interval of 5 hrs between subsequent coats. Sanding of the first coat shall be done using Sandpaper #600 or #1000